NE-9004 Programmable Peristaltic Pumps



• This pump is used for higher flow rates & larger dispense volumes.
  NE-9000 with 2 roller pumping head & 1/4" ID tubing.
• Flow rate ranges: 0.047 mL/min to 1038 mL/min.
• Includes PERI-HEAD-KIT-HGC2.
• Dispense and withdrawal pumping.
• Quick change pumping heads to quickly switch between fluids.
• Learn and Repeat™ mode to improve dispense productivity.
• Slow down mode to improve accuracy of dispenses.
• Anti-Drip mode to stop oozing after dispenses.
• Calibration mode to improve accuracy: Under 3% error.
• Power Failure Mode: Restarts the Pumping Program
  after a power interruption.
• Programmable dispense volumes. Store and select
  from up to 40 Dispenses.
• Selectable volume units of mL or oz.
• Selectable pumping rate units of mL/min, mL/sec, oz/min, oz/sec,
  or dispense a volume over a set time.
• Programming mode for complex pumping applications
  and interaction with external devices.
• Foot Switch control available.
• RS-232 bi-directional control for complete control from a PC.
  Network up to 100 pumps and other devices.
• Digital logic input: TTL I/O with software filtered control inputs
  to eliminate glitches and ringing on the control inputs. Configurable
  TTL operational trigger for foot switches and other devices.
• Audible alarm.
• Easy-to-use keypad interface.
• Non-volatile memory of all operating parameters
  and pumping program.
• Space Saving Chassis: Foot print size of only 7 3/4" x 5 1/4".
• Two year warranty.

Programmable Peristaltic Pumps: 9000 Series for large volume dispensing

The 9000 Series peristaltic pumps are equipped to be used in many settings from the small home based businesses
to the large factory floor.

Applications range from continuous flow to measured dispenses.

The pump can be integrated into existing pro- duction lines or simply used stand alone.

The 9000 Series is fully programmable and can be operated manually or with a PC through a RS-232 communication port. PC

Learn and Repeat™:

Quickly teach the pump the volume of a bottle or container. Then immediately fill all your bottles or containers to the same volume.

Quick Change Pumping Heads:

Reduce costs while increasing productivity by using one pump with multiple fluids. Quickly change between different fluids with extra pumping heads. Simply twist off one head and twist on a different head to change between fluids.


• 2 roller pumping head, 1/4"ID tubing.
• Maximum pumping rate: 1038 mL/min.
• Kit includes: Clear, 2 roller head.
• 4 ft. Tubing Model Q-TP-IND1-1/4 Industrial Grade
  & 1/4"ID x 6/16"OD x 1/16" Wall.
• Clamp ties: Nylon, quantity 4.
• Vial of lubricant.

Flow Rate


Part number: NE-9004

Price: $625 US